Installation instructions

See how easy it is to install our slats

1. Prepare the surface

Prepare the surface on which the slats will be fixed. You can mount the slats on plaster, plasterboard or wood-based materials. If you have wallpaper on the wall, we recommend removing it before installation.

2. Cut the slats

Cut the individual slats to the desired length before gluing. We recommend using a sharp circular or jig saw to cut the slats to the desired length.

3. Add glue

Add glue evenly to the back of the slats. Avoid over-applying only in certain areas which could cause the slats to peel off.

4. Fix the slats

The slats can be fixed vertically or horizontally. In addition to glue, you can use a nailer to better attach them to the wall. Use the nails only in the groove of the slats, which will not be visible after mounting.

5. Outer corners

If the slats meet in a corner, connect them with the grooves facing each other. This creates a very nice outside corner of the slats.

6. Just the end strips

For a perfect aesthetic effect, we recommend the use of finishing strips. Make sure to use the correct termination strip on the correct side of the slat.